Ore pellet binder made of humic acid salt, polymer materials, mineral materials, such as composite formulations made of ore by the strong affinity binding function, improve the mix of hydrophilic, as the ball 98 %. Physical and Chemical Properties appearance: dark gray powder fluid; H2O≤15%; Ash ≤30%; Fineness: 80-100 mesh powder Features 1, wide adaptability: The binder is particularly suitable for easy molding of iron ore fines, chromium slag, rock phosphate, copper, lead, zinc, nickel and other nonferrous ore production of cold-pellet, without sintering, smelting goods directly calcined 2, easy to use: directly in proportion to the mixing ore, binders, water 3 can be molded, performance: a molding, shaping rate of 98%. drop wet ball two meters square, natural drying or drying can be dried to strength 100kg / goals or more, high temperature 1200 ℃ lingers not powder 4, excluding all kinds of metal elements, does not affect the quality of use of a slag, slag 1000kg, around the binder 80kg 2, mineral powder, binder while agitating the water, depending on the size and humidity adjustment of raw materials plus water raw stir, hand into the group can not spread into the pressure dome pressure the ball 3, at 150 ℃ 2-3 hours drying conditions, but also other natural drying instructions pellet quality good or bad, and the nature of the feedstock, the pressure adhesive plasticity, and the addition amount of the binder is stirred uniformity machine related. Such as the production of pellets forming rate, increase the amount of adhesive. Therefore, to meet the pellet production users, be sure to local resources and user requirements as a precondition, then adjusted according to user requirements packaging, storage 1,25kg / bag, woven bag 2, and store in cool dry place, waterproof, Sai